Operating Manual Audiology Scanners
Document version: 3.3 04-2020 14
NOTICE
Measuring errors due to vibrations
Vibration affect the measuring accuracy.
Use a work table that:
Is stable or anchored
Can bear twice the weight of the load on it.
NOTICE
Measuring errors due to reflections on the measured object
(concerns open scanners)
Ambient light reflects on the measured object and influences the measuring
accuracy.
Choose a workstation that is not exposed to incident light or cover the
scanner, e.g. with light-tight foil.
NOTICE
Measuring errors due to unsuitable climatic conditions
Heat, cold and high humidity affect the ways materials expand and cause
measuring errors. Overheating can permanently damage the scanner.
Only operate smart optics scanners under the following conditions:
Temperatures between 15°C - 30°C
Low humidity
No direct sunlight.
If necessary, use air conditioning and sunlight protection.
NOTICE
Material damages due to moisture
smart optics are made of materials that are damaged by moisture.
Dry moist components with a soft, microfiber cloth.
To Next Page
Loading...