Operating Manual Audiology Scanners
Document version: 3.3 04-2020 9
2 For your safety
2.1
Intended use
smart optics scanners are to be used exclusively for the purpose of their
intended use, i.e.:
The optical three-dimensional measurement of human ear
impressions
The digital production and archiving of earmolds.
Material properties
Scannable impression materials must be:
Light-colored
Solid
Dimensionally stable
Dry
Opaque.
Reflective or dark surfaces must be matted with a 3D scan spray to become
scannable.
2.2
Non-intended use
The following cannot be scanned:
Transparent, non-dimensionally stable materials
Objects other than ear impressions
Living creatures.
The use of the scanner is excluded in:
Contaminated areas (e.g. with dust, vapors, oils, paints).
smart optics shall not be liable for any damage caused by improper use.
To Next Page
Loading...