Operating Manual Audiology Scanners
Document version: 3.3 04-2020 13
CAUTION
Injury due to entanglement of clothing, jewelry or hair
Loose objects can be drawn into the scanner.
In case of entanglement, switch off the scanner immediately and pull
out the mains plug. Remove any foreign objects from the scanner
before continuing to work.
Items such as the following should be avoided at the workstation:
Scarves & shawls
Neckties
Necklaces
Unbound long hair.
2.5
Protection against material damages
Some risks cannot be ruled out despite the protective measures. To avoid
material damages to devices and data:
NOTICE
Damage to optical and electronic components due to touching, soiling,
moisture, and cleaning agents
The optical and electronic components of scanners are very sensitive.
Protect the optical and electronic components by:
Not touching them
Not cleaning them
Keeping them clean and dry (close or cover the scanner)
Using the 3D scan spray only outside the scanner.
Optical and electronic components should only be cleaned by your
reseller or smart optics.
NOTICE
Data loss due to a too long USB cable
The length of the USB cable affects the data transfer between the scanner
and the PC.
Only use a USB cable with a maximum length of 2 m.
To Next Page
Loading...