Smart Optics mono Scan - Mouse in the 3 D Viewer

Operating Manual Audiology Scanners
Document version: 3.3 04-2020 39
Mouse in the 3D viewer
Default mouse button assignment
 
Left: click, hold + move Rotate the scan
 
Right: click, hold + move Move the scan

Rotate the scan Zoom in/out of the scan
See: Setting Change mouse functions
Rotate the scan
The pivot point is the center of the scan.
 Select a rotation axis. If All axes ∞ is selected, the axis of rotation follows
the motion of the mouse, so that tilting movements are also possible.
 To set the radius, click and hold:
 Inside the scan = Small radius
 Outside the scan = Large radius
 Move the mouse.
 Release the mouse button to stop the rotation.
Example: Left rotation around the Y-axis, start from the frontal view
Move the scan
 Click and hold the right mouse button (any point in the 3D viewer).
 Move the mouse.
 Release the mouse button to stop the motion.
The scan was moved too far and is no longer visible?
 Click on “Centering” or on a “Cube”.
75
 
360° rotation
40
 