Operating Manual Audiology Scanners
Document version: 3.3 04-2020 45
9.4
Repeating a scan
You can repeat a scan to replace a bad scan result with a new scan
(alternatively: Correcting a Scan).
Correct possible causes for the poor scan result:
Settings, e.g. the impression color
positioning of the ear impression.
Click on the icon “Scan again”.
The first scan result is discarded, and the object is scanned again. The scan
name is kept.
9.5
Annotating and commenting
Annotate a scan
Individual areas in a scan can be annotated, e.g. to identify errors in the
impression or to give instructions to production.
Enable the Notes Tool (3D viewer, top).
Rotate the scan so that the concerned area is visible.
Aim precisely at the area and double-click to set a marker (pin).
A numbered note symbol is set in the 3D viewer (blue for the left side, red
for the right side, numbered from 1 to 6).
Enter and save the note in the text field (150 characters max.).
When the work is finished, the text is printed in the order document
order.pdf. The target coordinates are documented in the project folder
(XML file).
To Next Page
Loading...