159
Still Image Operations
Chapter 7 Frame Memory
Frame Memory menu
a Auto store status display
Depending on the setup settings, this appears when the
auto store function is enabled.
b Display of available image capacity
This shows the remaining number of frames. When no
more frames can be stored, in pair mode “1” or “0” appears
in red, and in single mode “0” appears in red.
The lower figure shows the remaining number of frames
that can be used as extended clips.
When the signal format is 1080P, each time a still image is
saved the remaining space is reduced by two frames.
c Target FM selection buttons
2 Display of available image capacity
4 Pair selection button
6 File selection area
3 Target FM selection buttons
5 Pair button
1 Auto store status display
Frame memory
selection area
7 Frame memory
folder selection
area
9 Find button
8 Direct Recall
button
Notes
Status display
Still/duration display
Reposition/Lock status display
The border color shows the status as follows:
Blue: selected as the reference channel
Amber: selected, but not the reference channel
Black: not selected
Extended clip display
Display of ancillary data
To Next Page
Loading...
