454
Operations on Individual Files
Chapter 17 Files
Operations on Individual Files
You can save or load the contents of an individual file or
register. Carry out these operations in the File menu.
Displaying the Individual File Operation Menus
1
In the menu control block, press the top menu
selection button [FILE].
2
Depending on the type of file to be manipulated, select
the following ‘VF’ and ‘HF’ combination.
The following description refers to the example of carrying
out operations on snapshot files, but the procedure is
similar in the other menus.
Viewing Detailed File Information
As an example, to view detailed snapshot file information,
carry out the following procedure.
1
In the File menu, select VF3 ‘Snapshot’ and HF1
‘Snapshot.’
The Snapshot menu appears.
The status area shows the device status, and a list of
files present on the device.
2
Press [File Edit].
The file details appear (reference region file name,
creation date, regions including data) in table form.
Button HF1 HF2 HF3 HF4 HF5 HF6 HF7
VF1 Setup Initial Status Key Memory Video Proc
Memory
User Setup Export User
Source Name
Import User
Source Name
VF2 Effect 1-99 User DME Wipe
Effect 101-199
User DME Wipe
Effect 201-299
User DME Wipe
Effect 301-399
DEV/PBUS
Effect 1-250
––
VF3 Snapshot Wipe Snapshot DME Snapshot Key Snapshot Menu Macro – –
VF4 Shotbox Macro Macro Attachment – – – –
VF5 Frame Memory Frame Memory
Folder
File Name Data – – – –
VF6 All Import/Export – – – – –
VF7 Directory Unit ID Copy Group ID Copy – – – –
File Edit buttons
To Next Page
Loading...
