383
Keyframes
Chapter 13 Keyframe Effects
the duration of the deleted keyframe. Thus the effect
duration does not change.
Keyframe deletion position and the change in effect duration
Delay setting
You can set the delay from the time of executing an
operation to run the effect, and the effect actually starting
(that is, the delay until the first keyframe). You can make
this setting in the keyframe control block.
Note that changing the delay does not alter the duration of
the effect.
Paths
The term “path” refers to the specification of how
interpolation is carried out from one keyframe to the next.
Images are interpolated from an edit point to the next one
according to the path setting.
For details of the path setting procedure, see “Path
Setting” (page 401).
Switcher path settings
Carry out path settings in the Key Frame menu.
For each menu, the following settings are available.
M/E-1 and P/P menus
User1 to User8 menus
The items that can be adjusted depend on the settings in the
Setup menu.
For details, see “Setting User Regions” (page 526).
Deletion
position
Change in effect duration
Deletion of the
first keyframe
Deletion of an
intermediate
keyframe
Deletion
between two
keyframes
Deletion of the
last keyframe
Item Paths that can be set
M/E1, P/P All For each M/E and PGM/PST, path
settings for the following items are
made simultaneously.
Key1 to Key8 Overall path settings for items relating
to keys 1 to 8 are made
simultaneously.
Key1 All to
Key8 All
Source Key source path for keys 1 to 8
Fill Key fill path for keys 1 to 8
Proc Proc path for keys 1 to 8
Trans Transition path for keys 1 to 8
Bkgd/Util Overall path settings for items relating
to backgrounds and utility buses are
made simultaneously.
Bkgd/Util All
Bkgd A Path for background A
Bkgd B Path for background B
Util 1 Path for utility 1
Util 2 Path for utility 2
DME 2nd
Video
Path for video to be used for second
DME channel
Wipe/DME Wipe Overall path settings for items relating
to wipes and DME wipes are made
simultaneously.
Wipe/DME
Wipe All
Wipe Path for wipes
DME Wipe Path for DME wipes
Trans – Transition path for each M/E and P/P
bank
Item Paths that can be set
User1 All to User8 All Overall path settings for the
following items for each “User” are
made simultaneously.
FM All Overall path settings for frame
memory items are made
simultaneously.
FM Still Store Overall path settings for frame
memory freeze image output are
made simultaneously.
FM Still Store
All
FM Still Store
1 to 8
Paths for frame memory freeze
image outputs 1 to 8
Aux Overall path settings for AUX buses
are made simultaneously.
Aux All
Aux 1 to 48 Paths for Aux 1 to 48
To Next Page
Loading...
