Sony MVS-7000X - Page 356

356
Functional Differences With Models of DME
Appendix (Volume 1)
a) [External] cannot be selected in the <Flex Shadow Source> group or [Ext
Video] cannot be selected in the <Flex Shadow Fill> group.
b) Effect groups 1 and 2 cannot be selected at the same time. Pattern 304
(Round Corner) is not supported.
Adding user texture
patterns (for Spotlighting)
7316.9 No Yes No “Adding User
Texture
Patterns” in
Chapter 18
(Volume 2)
Setting AUX bus output/
reentry input
7337.7 It is not possible to
make settings for
DME 1 to 8 Ext In.
It is not possible to
make settings for
DME 1 to 8 Ext In.
It is not possible to
make settings for
DME 1 to 8 Ext In.
“Setting the
AUX Bus
Output and
Reentry Input”
in Chapter 20
(Volume 2)
TBC window center
position (Video/Key)
7341.1 Yes only when SDI
interface is used.
Yes only when SDI
interface is used.
No “Setting the
TBC Window
Center Position”
in Chapter 21
(Volume 2)
TBC window center
position (Ext.In)
No Yes Yes “Setting the
TBC Window
Center Position”
in Chapter 21
(Volume 2)
Adjustment of monitor
output video clip level
7343 Yes only when SDI
interface is used.
Yes only when SDI
interface is used.
No “Adjusting the
Monitor Output”
in Chapter 21
(Volume 2)
Settings relating to usage
of editor port
7344 Yes Yes No “Interfacing
With External
Devices
(Device
Interface
Menu)” in
Chapter 19
(Volume 2)
1080P supported 7313.1 Yes No Yes “Setting the
Signal Format
(Format Menu)”
in Chapter 18
(Volume 2)
Function Menu number MVE-8000A MVE-9000 MKS-7470X/7471X See