411
Register Operations in the Menus
Chapter 13 Keyframe Effects
In the Effect >Status menu, use the following procedure.
1
Using any of the following methods, select the copy
source register.
• Press directly on the corresponding register
indication in the status area.
• Turn the knob.
2
In the <Copy> group, press [From __ ].
3
Select the copy destination register.
4
In the <Copy> group, press [To __ ].
Deleting the contents of a register
(This applies to all regions.)
In the Effect >Status menu, use the following procedure.
1
Using any of the following methods, select the register
you want to delete.
• Press directly on the corresponding register
indication in the status area.
• Turn the knob.
2
Press [Delete].
Renaming a register
(This applies to all regions.)
In the Effect >Status menu, use the following procedure.
1
Using any of the following methods, select the register
you want to rename.
• Press directly on the corresponding register
indication in the status area.
• Turn the knob.
2
Press [Rename].
A keyboard window appears.
3
Enter a name of up to eight characters, and press
[Enter].
Knob Parameter Adjustment Setting values
1 Register Register selection 1 to 99
Knob Parameter Adjustment Setting values
1 Register Register selection 1 to 99
Knob Parameter Adjustment Setting values
1 Register Register selection 1 to 99
To Next Page
Loading...
