Sony MVS-7000X - Page 604

604
Error Messages
Appendix (Volume 2)
Loading Texture Pattern
Target File: XXXXX
Failed to load target bmp file./Illegal Name.
This operation is canceled.
7316.9: Engineering Setup >System >Install/Unit Config >Texture
Package
In the above menu, an error occurred when loading a texture file.
Delete texture files with an illegal size or illegal file name, then try
again.
Target File: XXXXX
Failed to load target bmp file./Illegal Size.
This operation is canceled.
Make Package
Texture file: XXXXX
Not Found.
This texture file does not exist on the
removable disk.
7316.9: Engineering Setup >System >Install/Unit Config >Texture
Package
In the above menu, when loading an already created texture
package, a texture file within the texture package was not found.
This operation is cancelled, because
capacity is full.
Please clear texture pattern.
7316.9: Engineering Setup >System >Install/Unit Config >Texture
Package
In the above menu, when making a texture package, there was
insufficient space on a memory card.
Password
Password Incorrect 7317.1: Engineering Setup >System >Maintenance >Setup
Operation Lock
In the above menu, the wrong password was entered.
Enter the correct password.
Record
Cannot be executed.Maximum number of
clips are created.
2523: Frame Memory >Clip >Record
In the above menu, an attempt was made to execute [Rec Start] but
the number of recorded clips had already reached its upper limit.
Refresh Status
No external HDD was found (–2). 2561: Frame Memory >External Device >Ext HDD Format
2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menus, an attempt was made to execute [Refresh
Status] but the external hard disk could not be recognized. Check
that the external hard disk is correctly connected.
Cannot access the partition (
–12). 2561: Frame Memory >External Device >Ext HDD Format
2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menus, an attempt was made to execute [Refresh
Status] but the logical drives of the external hard disk could not be
accessed. Check that the external hard disk is correctly formatted.
Cannot access the directory (
–20). 2561: Frame Memory >External Device >Ext HDD Format
2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menus, an attempt was made to execute [Refresh
Status] but the directory of the external hard disk could not be
accessed.
Cannot access the directory (
–21).
The external HDD is busy (–22). 2561: Frame Memory >External Device >Ext HDD Format
2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menus, an attempt was made to execute [Refresh
Status] but the external hard disk was busy and could not be
accessed. Try again after you check that the access lamp of the
hard disk or the indicator of the menu is turned off.
Rename
Files currently used for playback cannot be
renamed.
2546: Frame Memory >File >Rename
In the above menu, an attempt was made to execute [Rename], but
a movie (clip) currently being played back is included in the selected
files.
No external HDD was found (–2). 2546:Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, when [Rename] is pressed, this message
appears if the external hard disk cannot be found. Check that the
external hard disk is connected correctly.
Icon Message Description