606
Error Messages
Appendix (Volume 2)
Cannot access the partition (–12). 2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, an attempt was made to execute [Restore] but
the logical drives of the external hard disk could not be accessed.
Check that the external hard disk is correctly formatted.
Cannot access the directory (–20). 2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, an attempt was made to execute [Restore] but
the directory of the external hard disk could not be accessed.
Cannot access the directory (–21).
The external HDD is busy (–22). 2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, an attempt was made to execute [Restore] but
the external hard disk was busy and could not be accessed. Try
again after you check that the access lamp of the hard disk or the
indicator of the menu is turned off.
No file was found (–40). 2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, an attempt was made to execute [Restore] but
the file to be written into the external hard disk was not found.
Restore operation failed (–42). 2562: Frame Memory >External Device >Ext HDD Backup/Restore
In the above menu, an attempt was made to execute [Restore] but
the recalling file from the external hard disk was not completed
correctly.
Restore operation failed (–43).
Restore operation failed (–46).
No directory exists (–50). 2562: Frame Memory > External Device >Ext HDD Backup/Restore
When [Restore] was pressed in the above menu, the specified
directory does not exist.
Rename operation failed (–52). 2562: Frame Memory > External Device >Ext HDD Backup/Restore
When [Restore] was pressed in the above menu, directory
renaming failed.
Rename operation failed (–53).
Invalid FM OutCh (–6). 2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message
appears if the specified frame memory output channel cannot be
used.
Specified FM OutCh was locked (–7). 2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message
appears if the specified frame memory output channel is locked.
Restore failed, some Clip files cannot be
deleted on this board (–8).
2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message
appears if the restore failed because a clip file cannot be deleted.
FM 2nd board not exist (–9). 2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message
appears if there is no second board.
Not enough free register area for Backup or
Restore process (–10).
2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message
appears if there is not enough space to carry out the backup.
Prepare failed, not any file was found on this
board (–11).
2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message
appears if no image is present.
Prepare failed, insufficient Clip id (–15). 2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message
appears if there are not enough Clip IDs (internal processing error).
Restore failed, Cannot find symbol files on
this tape (–18).
2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message
appears if a marker frame file was not found.
ERROR (–19). Bad register number. 2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message
appears if Register Number is invalid (internal processing error)
Restore failed, file name already exist, try to
rename but unsuccessful (–20).
2565:Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message
appears if renaming failed.
Icon Message Description
To Next Page
Loading...
