222 Sun Server X4-2 Service Manual • May 2014
TABLE: BIOS UEFI Driver Control Menu Options
Setup Options Options Default Description
iSCSI Configuration NA NA Select to configure the iSCSI initiator name
parameters. Only available in UEFI BIOS mode.
iSCSI Initiator Name NA (must be
specified)
None The worldwide unique name of the iSCSI Initiator.
Only IQN format is accepted.
Add an Attempt When this option is selected, a sub-menu with following options is presented.
• iSCSI Attempt
Name
None The human name that you assigned to this attempt.
• iSCSI Mode Disabled Set to Enabled for multipath I/O (MPIO). MPIO can
boost the performance of an application by load
balancing traffic across multiple ports.
To Next Page
Loading...
