Sun Oracle Sun Server X4-2 - Page 238

224 Sun Server X4-2 Service Manual • May 2014
Related Information
■ “BIOS Main Menu Selections” on page 198
Add an Attempt
(Continued)
• Authentication
Type
CHAP Defines the Challenge-Handshake Authentication
Protocol (CHAP)
• CHAP Type One Way Use to set CHAP type to either One Way or Mutual.
• CHAP Name None Use to set CHAP name.
• CHAP Secret None Use to set the CHAP secret. The secret length range
is 12 to 16 bytes.
Delete Attempts NA None Use to delete one or more attempts.
Change Attempt
Order
NA None Use to change the order of attempts.
Controller
Management
Select to manage controller properties, to create or
clear controller configurations, and to save or clear
controller events.
View Controller
Properties (R/O)
Select to view controller properties.
Change Controller
Properties
Select to change controller properties.
Create Configuration Use to specify RAID level and select physical disks.
Save Controller
Events
Select to specify the file system, the directory and the
file name to used to save controller events.
Physical Disk
Management
Select to view properties and perform operations on
physical disks.
View Physical Disk
Properties (R/O)
Select to view physical disk properties
Select Physical Disk
Operations
Select to manage physical disk operations
Port Configuration
Menu
Select to set and display port configuration
information.
NIC Configuration
(R/O)
Select to view the network device port setting.
Blink LEDs 0 - 15 0 LEDs will blink for a specified duration (up to 15
seconds)
Port Configuration
Information (R/O)
Displays the port settings for the network device.
TABLE: BIOS UEFI Driver Control Menu Options (Continued)
Setup Options Options Default Description