Svantek SV 977D User Manual

111
SV 977D User Manual
Bar plot of RT60 results
1. Number of averaged results
2. RT 1/3 octave plot
3. Name of the RT result and its value
4. Used RT60 calculation method
5. Cursor position
6. RT results for Total values
7. Cursor position value (central band
frequency)
Changing RT result
When the field 3 is active the RT60 analysis
result can be changed with the ◄ / ► key
pressed together with <Alt>.
<Alt/►>
Changing cursor position
You may change the cursor position with the
◄ / ► key.
►...
Sound pressure decay curve plot
1. Logger file content
2. T0 marker position
3. Decay curve plot
4. Central frequency of selected by cursor
1/3 octave band
5. Result value (SPL) for the cursor position
6. Name of the logger file
7. T1 marker position
8. Cursor position
9. RT60 method
10. Type of data displayed: Raw, Smoothed
or Integrated
11. Calculated steady upper sound level
value
12. Calculated steady lower sound level
value
13. RT result (RT30, RT20, EDT and
RT User) with calculated reverberation
time
14. Cursor measurement time position
T0 marker position is used as a starting point for all three (and
the RT User also) reverberation time results.
T1 marker position is labelled on the display (indicator A7) as
EDT, RT20 or RT30 according to which the most restricted
definition of the RT condition is fulfilled.
3
4
12
13
2
11
6
9
14
5
7
8
10
1
2
3
6
7
1
5
4

Svantek SV 977D Specifications

General

Brand	Svantek
Model	SV 977D
Category	Measuring Instruments
Language	English