Svantek SV 977D - Auxiliary Parameters

175
SV 977D User Manual
SSL Encryption
Parameter of the E-mail Settings screen switching on the
option enabling attempt to configure the modem for
connecting to the mail server used the encryption
protocol SSL.
Chapter
15.2.5
Default Port
Parameter of the E-mail Settings screen switching on the
option enabling attempt to communicate with the mail
server on the default port (25 for normal calls, 465 with
SSL).
Chapter
15.2.5
Port
Parameter of the E-mail Settings screen defining user’s
own port.
Chapter
15.2.5
Unit Name
Screen that enables editing of the instrument name
visible by the SvanNET web-service.
Chapter
7.10
Unit Label
Screen that displays information about the instrument
type, its serial number, the current software version
installed and the relevant standards, which the
instrument fulfils.
Chapter
7.11
18.7 AUXILIARY PARAMETERS
Name
Description
Screen
Reference
Auxiliary Setup
Section in the Main Menu that enables customizing the
instrument interface to specific user requirements in the
screens: Language, Factory Settings, Reference Levels,
Vibration Units and Warnings.
Chapter
8
Language
Selection of the user interface language.
Chapter
8.1
Factory Settings
Restoration of the default settings of the instrument.
Chapter
8.2
Reference Levels
Screen that enables defining reference levels of the
vibration signal for acceleration (Acc), velocity (Vel) and
displacement (Dil).
Chapter
8.3