Svantek SV 977D - Advanced Alarm Function - Alarms

60
SV 977D User Manual
It is recommended to set the Start Delay time to 0 seconds for the Timer
function.
4.11 ADVANCED ALARM FUNCTION – ALARMS
The Alarms position appears in the
Measurement list in the case the advanced
alarms configuration file (ALARM.SVA) is
uploaded to the predefined SYSTEM
catalogue. It opens the screen in which you
can enable or disable the advanced alarm
function. Default mode: disabled.
<ENT>
Note: The advanced alarm settings are configured via the SvanPC++ software or via the SvanNET
web service since this function was designed for the SV 277 monitoring stations (see Chapter
15.1).