Svantek SV 977D - Downloading Files and Processing Data

122
SV 977D User Manual
Note: Any confirmed changes in the Ambient noise table will replace the previous ones and new
ambient noise distortions will be considered during the next measurements!
If you press the <Summ.> soft-key in the
Area view, the instrument will switch to the
Area summary view.
<ENT>
From the Area summary view, you can return
to the Area view with the <Back> soft-key or
you can go to the STIPA Settings screen
with the <Setup> soft-key.
In the STIPA Settings screen you can create
new Project, Area or Source and continue
measurements for the new area.
<ENT>
You can exclude/include a measurement
point(s) from averaging. For this, select it with
the ▼/▲ key and press the ◄/► key
together with <Alt>. Values in the Area
summary view will be recalculated without
consideration of the excluded point(s).
The directory of the excluded point will have
the “_” character instead of “P”.
<Alt/►>
You can delete a measurement point. For
this, select it with the ▼/▲ key and press the
<Delete> soft-key. After confirmation the
selected point will be deleted.
The point directory with all measurement files
will be deleted from the Source directory.
<ENT>
To view measurements for the measurement
point, select it with the ▼/▲ key and press
the <View> soft-key.
<ENT>
You can finish measurements for the selected Project/Area/Source at any time and if necessary create next
Project/Area/Source combination in the STIPA Settings screen.
13.5 DOWNLOADING FILES AND PROCESSING DATA
The measurement files created during the STIPA measurements by SV 977D can be download and analysed
with the use of SvanPC++ software.
The SvanPC++ software allows you to download files and analyse measurement data made with the use of the
SV 977D instrument as well as projects created by the BA Assistant application for smartphones.