Svantek SV 977D User Manual

121
SV 977D User Manual
4. To finish measurement series for the
measurement point, you should
complete them pressing the
<Completed> soft-key.
The instrument switches to the Area
view.
<ENT>
Note: In case of automatic averaging the series of measurements will be completed automatically after
meeting the conditions specified in the selected standard.
If you select a measurement in the Point view
and press the <View> soft-key, you can view
the modulation function coefficients for seven
octave bands and two modulation
frequencies (f1 and f2) for this measurement.
To return to the Point view press <ENTER>
or <ESC>.
<ENT>
You can delete the selected measurement
pressing the <Delete> soft-key.
After deleting the measurement, the
instrument will change the numeration of
measurements in the Point view. At the same
time the file with the measurement results will
be deleted from the Point directory.
<ENT>
You can exclude/include the selected
measurement from the averaging by pressing
the ◄/► key together with <Alt>. The file
with the excluded measurement results will
have the “_” character instead of “M”.
<Alt/►>
5. After completion of the measurement
series for the measurement point, you
can create a new measurement point
pressing the <Next> soft-key in the Area
view. The instrument will create a new
point directory and switch to the Point
view.
To start measurements in the new
measurement point, press the <Start>
key and follow steps 2 – 4.
<ENT>
In some cases, it may be necessary to
change ambient noise levels for a new
measurement point.
In such a case, before making first
measurement in the Point view press the
<Noise> soft-key and in the Ambient noise
screen make necessary adjustments of the
noise levels for octaves.
<ENT>
After confirmation of the changes with the <ENTER> key you will return to the measurement mode with new
ambient noise distortion parameters.

Svantek SV 977D Specifications

General

Brand	Svantek
Model	SV 977D
Category	Measuring Instruments
Language	English