Svantek SV 977D User Manual

74
SV 977D User Manual
If the Delete All command is performed in a
root directory, all files and directories in this
root directory will be erased. After this
operation three directories will be created as
default directories: SETUP, SVANTEK and
SYSTEM.
<ENT>
6.1.5 Renaming files/directories – Rename
You can rename files or directories. To do this,
select the desired file or directory and press
<ENTER>. Select the Rename command in
the command list and press <ENTER>. The
special screen with editor function will be
opened.
<ENT>
If a file with the new name is already exists in
the directory, the warning will be generated
and rename command will not be performed.
After pressing any key, the instrument will
return to the editor screen.
<ENT>
6.1.6 Viewing information about files/directories – Info
You can view information about a file or a
directory. To do this, select the desired
file/directory and press <ENTER>. Select the
Info command in the command list and press
<ENTER>. The information screen will be
opened.
<ENT>
The file Info screen contains information about date and time of file creation, file size, number of records with
summary results and results saved with the logger step for three profiles.
6.2 MANAGING SETUP FILES – SETUP MANAGER
Setup Manager enables saving new setup
files, deleting, renaming or loading them as
current instrument settings. You can also
select the setup files which will be presented
on the Select Setup screen appeared after
turning the instrument on (see Chapter
2.7).
All setup files are stored in the default SETUP
directory on the SD-card.
<ENT>

Svantek SV 977D Specifications

General

Brand	Svantek
Model	SV 977D
Category	Measuring Instruments
Language	English