Svantek SV 977D - Cleaning; Troubleshooting

142
SV 977D User Manual
17.8 CLEANING
Clean the surface of the instrument with damp soft cloth.
The instrument sockets should be cleaned with the use of compressed air.
Note: In cases of larger dirt, such as oil or grease, contact your Local Authorized Distributor or
Svantek Service Office.
17.9 TROUBLESHOOTING
• In case your instrument does not respond proceed with hardware reset of the instrument (see
Chapter 17.4).
• In case the reset does not help call your Local Authorized Distributor or Svantek Service Office.
Should your SVANTEK professional measurement equipment need to be returned for repair or for calibration,
please contact the service office at the following number or contact via the SVANTEK website.
Service Office: +48 (22) 51-88-320 or +48 (22) 51-88-322.
Office hours are 9:00 a.m. to 5:00 p.m. Central European Time.
E-mail:
office@svantek.com.pl
support@svantek.com.pl
Internet: www.svantek.com
Address: SVANTEK Sp. z o.o.
Strzygłowska 81
04-872 Warszawa,
Poland