Svantek SV 977D User Manual

72
SV 977D User Manual
6.1 MANAGING INSTRUMENT’S FILES – FILE MANAGER
Files are stored in directories, which are
organised hierarchically.
File Manager enables access to all files and
directories.
<ENT>
In the File Manager screen, you can check
the memory content, create new directories
and files, select directory for automatic data
files saving, rename and delete files and
directories.
All these operations can be done on the
selected file or directory by means of the
command list which is opened with the
<ENTER> key.
<ENT>
Creating new directory or file
The first two positions of the File Manager list
are New Directory and New File, which
serve for creation of the new directory or file.
To do this, enter the directory in which the new
element will be created, press <ENTER> at
the New Directory or New File position and
edit the new directory or file name in the text
editor screen.
<ENT>
Note: The New File position appears if the measurement was performed.
Changing directories
The marked directory can be opened with the
► key.
To return to the upper directory, press the ◄
key.
►
6.1.1 Assigning the directory for saving data files – Set as Working Directory
You can assign a directory for automatic
saving of logger and wave files. To do this,
choose the required directory and press
<ENTER>. After opening the command list,
select Set as Working Dir. and press
<ENTER>.
Starting from this moment all logger and wave
files will be saved in this directory.
<ENT>
Note: The working directory name is displayed in the bottom line of the display.

Svantek SV 977D Specifications

General

Brand	Svantek
Model	SV 977D
Category	Measuring Instruments
Language	English