Changing active fields
You can change the active field with the â–² / â–¼
(vertically) or â—„ / â–º (horizontally) key.
The Logger view depends on settings made
in the Logging list (path: <Menu> /
Measurement / Logging). If Logger (path:
<Menu> / Measurement / Logging /
Logger Setup) is disabled, the Logger view
mode is not active!
So, to have this view active, enable the
Logger!
When Logger is enabled, and some results
for profiles have been selected for logging, the
logger plot can be viewed.
Logger view fields
1. Y-scale
2. Logger plot
3. Name of the logged result and profile
number
4. Name of the file
5. Real Time Clock
6. Cursor position
7. Result value for the cursor position
8. Cursor time position
You may change the cursor position with the
â—„ / â–º key.
The bottom line of the screen displays the
value of the result from field 3 for the cursor
position.
To Next Page
Loading...
Need help?
General
