The Pause mode allows you to erase up to 16
last seconds of the measurement with the â—„
key. One press deletes one second of the
measurement and this reduces also the
elapsed time.
It may be useful if, for example, the
measurement is temporarily disturbed by
some event that should not normally occur.
To continue the measurement, press
<ENTER>.
To configure a measurement or the instrument, use the menu mode, which is switched with the <Menu> key.
The menu consists of different type of screens, which include main menu, sub-menu, lists of options, lists of
parameters, text editor screens, information screens etc.
Main menu
The main Menu contains the headers of six sections (sub-menu), which group
configuration settings by feature. The main Menu is opened after pressing the
<Menu> (<Shift> + <ENTER>) key. The main Menu list contains the following
sections: Function, Measurement, Display, File, Instrument,
Auxiliary Setup and Report.
Recent Items list
Double pressing of the <Menu> key opens the list of recently used menu items.
This enables accessing most frequently used lists of parameters quickly, without
the necessity of passing through the whole menu path.
Selecting position
The desired position in the menu list is
selected with the â–² / â–¼ key.
Opening position
After selecting the desired position in the
menu list, press the <ENTER> key to open it.
After this operation, a new sub-menu, option
list, parameter list or information screen
appears on the display.
List of parameters
List of parameters contains parameters the value of which is selected from the
available range or set.
• The desired position in a list is selected with the ▲ / ▼ key.
• Changing value in the selected position is performed with the ◄ / ► key.
• The <ENTER> key saves all performed changes in the list of parameters.
To Next Page
Loading...
Need help?
General
