8 AUXILIARY SETTINGS – Auxiliary Setup
The Auxiliary Setup section provides
additional functions that allow, for instance,
customization of the device interface to a
specific user requirement and are not directly
related to the hardware components of the
instrument.
The Auxiliary Setup section contains following positions:
Language allowing you to select the language of the user interface,
Factory Settings allowing you to return to the default, factory settings,
Reference Levels allowing you to select reference levels for Vibration measurements,
Vibration Units allowing you to select units for Vibration results; this position appears only in
the Vibration modes,
Warnings allowing you to enable/disable warnings to be displayed during the normal
operation of the instrument.
8.1 SELECTING THE LANGUAGE OF THE USER INTERFACE– LANGUAGE
The Language position allows you to select
the language of the user interface.
If after turning the instrument on an unknown
language interface appears on the display,
you can reset the instrument with four <Shift/
Enter/Alt/Start> keys pressed together. The
instrument will come back to the default setup
with the English interface.
8.2 RESTORING FACTORY SETTINGS – FACTORY SETTINGS
The Factory Settings position allows you to
restore the default settings of the instrument.
Being on the Factory Settings position press
<ENTER>, select Yes in the opened
Factory Settings screen and press
<ENTER> to perform the operation. After the
restoration process the instrument will inform
that “Settings restored”.
The factory settings can be installed also with four <Shift/Enter/Alt/Start> keys pressed together.
Note: The Factory Settings command also restores the English language of the interface.
To Next Page
Loading...
Need help?
General
