Svantek SV 977D User Manual

69
SV 977D User Manual
Switching grid on/off
The Grid position allows you to toggle the
horizontal grid lines of the logger or spectrum
graph.
=>
Decimal Mark
The Decimal Mark position allows you to
select which decimal mark (point or comma)
will be used for data presentation in all
presentation modes.
5.3 CUSTOMIZING THE LOGGER VIEW – LOGGER VIEW
The Logger View screen allows you to adjust
the Logger view by choosing logged results
to be displayed and colours of their curves.
Every logger curve shows the history of one
result measured in a profile, like Peak(1). In
the Logger View screen, you can include or
exclude the curve from the logger plot and
define the colour of this curve.
<ENT>
The view of the logger screen can be adjusted
quickly without stopping the measurement.
Highlight the function label in the bottom left
corner and press <ENTER>. The Logger
View list will be displayed in which you can
make necessary adjustments and return to
the Logger view after confirmation of the
performed changes with the <ENTER> key.
<ENT>
5.4 CONFIGURING DISPLAY BRIGHTNESS AND POWER SAVER – SCREEN SETUP
The Screen Setup screen allows you to
configure brightness of the display and
switching the power saver.
<ENT>
Display brightness
The Brightness position allows you to set the proper brightness of the display
with the ◄ / ► key. You can select 20 different values of this parameter. The
new value of brightness level is confirmed after each press of the ◄ / ► key.

Svantek SV 977D Specifications

General

Brand	Svantek
Model	SV 977D
Category	Measuring Instruments
Language	English