Svantek SV 977D - Page 5

5
SV 977D User Manual
7 CONFIGURING INSTRUMENT PARAMETERS – Instrument 76
7.1 Measurement auto start – Auto Start 76
7.2 Checking instrument’s powering – Battery 76
7.3 Setting the interface parameters – Communication Ports 77
7.4 Setting the external power On/Off conditions – External Power 78
7.5 Selecting the IEPE supply current – IEPE Current 78
7.6 Programming the keyboard– Keyboard Settings 78
7.7 Setting the I/O port parameters – Multifunction I/O 79
7.8 Programming the instrument’s internal Real Time Clock – RTC 81
7.9 Remote communication settings – Wireless Transfer 81
7.10 Assigning a name to the instrument – Unit Name 81
7.11 Checking instrument properties – Unit Label 82
8 AUXILIARY SETTINGS – Auxiliary Setup 83
8.1 Selecting the language of the user interface– Language 83
8.2 Restoring factory settings – Factory Settings 83
8.3 Setting the reference levels – Reference Levels 84
8.4 Choosing units for vibration results – Vibration Units 84
8.5 Activating warnings – Warnings 84
9 PRINTING REPORTS – Report 86
10 1/1 OCTAVE AND 1/3 OCTAVE ANALYSER 89
10.1 Activating the 1/1 Octave or 1/3 Octave function 89
10.2 Configuring the 1/1 octave or 1/3 octave analyser 90
10.2.1 General measurement settings for 1/1 or 1/3 octave analysis – General Settings 90
10.2.2 Selecting the measurement range for 1/1 or 1/3 octave analysis – Range 90
10.2.3 Logging of 1/1 or 1/3 octave spectra – Logging 90
10.2.4 Setting 1/1 or 1/3 octave analysis parameters – Spectrum 90
10.3 Customizing 1/1 or 1/3 octave spectra views 93
10.3.1 Enabling the 1/1 and 1/3 octave spectra view 93
10.3.2 Customizing the spectrum graph – Display Scale 94
10.3.3 Selecting the spectra to be viewed – Spectrum View 95
10.3.4 Changing the spectrum type in Vibration modes – Spectrum Type 97
10.3.5 Spectrum statistics 97
11 FFT ANALYSER 99
11.1 Selecting the FFT function 99
11.2 Configuring the FFT analyser 99
11.2.1 General FFT analysis measurement settings – General Settings 99
11.2.2 Selecting the measurement range for FFT analysis – Range 99
11.2.3 Logging of FFT spectra – Logging 100
11.2.4 Setting FFT analysis parameters – FFT 100
11.3 Customizing the FFT spectra view 101
11.3.1 Enabling the FFT spectra view 101