1
097-55501-01 Issue 6 – June 2003 197
2
5
3
Specifications
6.1.10 DS1 Outputs
Connector Type: Wire-wrap pins
Connector Label: 1–10 (S, T, R)
Connector Location: Wire-wrap panel
Number of Outputs: Up to 40 protected or non-protected outputs per card
Maximum of 140 per system
Bit Rate: 1.544 Mb/s
Impedance: 100 Ω balanced
Format: DS1
Framing: D4 or ESF (selectable)
SSM: Enable, Disable
Line Code: B8ZS
Amplitude: 2.4 V to 3.6 V terminated with 100
W
6.1.11 Composite Clock Outputs
Connector Type: Wire-wrap pins
Connector Label: 1–10 (S, T, R)
Connector Location: Wire-wrap panel
Number of Outputs: Up to 40 protected or non-protected outputs per card
Maximum of 140 per system
Bit Rate: 64 kb/s
Impedance: 133 Ω balanced
Line Code: Bipolar RTZ