104 097-55501-01 Issue 6 – June 2003
1
TimeHub 5500 System Guide
Figure 4-5. Management Card Switch S1
Table 4-2. S1 Switch Settings
S1
Section
Position Description Factory
Setting
1 On Security enable –
Off Security disable X
2 On Force disable local port (local port can be disabled by TL1
command)
X
Off Force enable local port (local port is enabled even if
previously disabled by TL1 command)
–
Local
Communication
Port
(On)
1
8
Note: Switch S1 is shown in the factory-set position.
Front Panel
S1