SYSMEX pocH-100i - 6. Troubleshooting

6-1
12345 786
TROUBLESHOOTING
INTRODUCTION
pocH-100
i
Revised February 2011
6. TROUBLESHOOTING : CONTENTS
6.1. GENERAL ERRORS, INSTRUMENT FAILURE 6-2
6.2. ERROR MESSAGES 6-3
6.3. ERROR MESSAGES, POSSIBLE CAUSES AND ACTIONS TO RESOLVE THE ERROR 6-4
Vacuum Error
Waste C. Error
Replace pocH-pack 65
Drain Error
Piercer MC Error / PinchV1 MC Error / PinchV2 MC Error / Syringe MC Error
Piercer MT Error / Syringe MT Error
PinchV1 MT Error
Aperture Clog
Temp. Error (H) / Temp. Error (L)
Blank Error
HGB Error
QC (L-J) Error / QC (X
_
) Error
PLT Smp’g Error / RBC Smp’g Error / WBC Smp’g Error
QC Data Error / Setting Error / Stored Error
RAM and ROM Error
Tube holder Error
Setting Seq. Err
R-Cover open
PLT Noise Error / RBC Noise Error / WBC Noise Error
PPMC Cont. Error
HC Buffer Full / LAN Buffer Full / Print Buffer Full
No Printer Paper
Printer Error
HC ACK Timeout / HC Of f-line / HC NAK Retry
LAN no Response
6.4. PRINT ERROR LOG 6-9