Technogym Run MED - Usage Data; Read from Low Kit; Write to Low Kit

RUN MED: Service & Maintenance Manual - rev. 1.0
9.2.4. USAGE DATA
This function makes it possible to access the machine usage data stored in the low kit. To access
this menu, when the LED display shows:
USAGE DATA
press ENTER. This function is structured as follows:
OPERATING DATA
Life Kit H
Life AC M
WRITE TO
LOW KIT ?
READ FROM
LOW KIT ?
Life DC M
Life Kit L
Tot. Km
READ FROM LOW
WRITE TO LOW KIT ?
In addition to the machine usage data, this function also includes the 2 sub-functions described
below:
9.2.4.1. Read from low kit
To read the parameter values from the low kit memory to view them on the display, scroll using the
+/- keys until the LED display shows:
KIT ?
press ENTER to read the parameters from the low kit, and return to the upper menu level by
pressing CLEAR for a few seconds.
9.2.4.2. Write to low kit
To write the values of the currently displayed parameters to the low kit, scroll using the +/- keys
until the LED display shows:
Page 9.13