Technogym Run MED - Tools Required for Maintenance

RUN MED: Service & Maintenance Manual - rev. 1.0
Page 12.2
12.3. TOOLS TO USE
• Medium Phillips screwdriver;
The following tools are necessary to carry out all disassembly, adjustment and maintenance
operations on the machines:
• Small Phillips screwdriver;
• Flat head screwdriver;
• 8-gauge wrench;
• 4-gauge hexagonal T-wrench;
• 4-gauge hexagonal T-wrench;
• 6-gauge hexagonal T-wrench;
• 8-gauge hexagonal T-wrench;
• Torque wrench;
• 17-box wrench.
CAUTION: Tool measurements are expressed in mm.