Technogym Run MED - Disassembling the Emergency Button

RUN MED: Service & Maintenance Manual - rev. 1.0
7.6. DISASSEMBLING THE EMERGENCY BUTTON
Figure 7.6-1
1. Turn off the machine and unplug the mains
lead from the wall outlet.
2. Back off the 4 screws a using a small Philips
screwdriver.
Figure 7.6-2
. Disconnect the two Faston connectors
4. Remove the emergency button.
To reassemble the emergency button, carry out
the above steps in reverse order.
3
indicated in the figure from the emergency
button.
Page 7.7