215
Utilities Menu
The Utilities menu provides access to utilities used by the instrument such as instrument
calibration, instrument diagnostics, and user preferences. All utilities are accessible from the menu
bar only. None of the utilities are directly accessible from the front panel controls or from the
toolbar.
Set Time and Date
Access this control window from the Utilities menu Set Time & Date command.
Overview
Use the Set Time and Date control window to set the time and date on the instrument.
To Use
Click the controls in the window to map them to the multipurpose knobs and use the knobs to set
the time and date. Click Set time and date now to save your changes. You can also click Get
current time to set the time using the system clock. This is useful if the instrument clock becomes
out of sync.
Behavior
The controls in this window operate the same as the standard Windows Date/Time Properties
dialog box. After you click Set time and date now, the system date and time are set to the specified
values. These controls are provided as a convenience so that you can change the date and time
without having to go to the Windows Date/Time Properties dialog box.
The instrument clock is suspended when this window is open. Click Get current time to
resynchronize the clock with the PC clock.
To Next Page
Loading...
Need help?
General
