361
Minimizing the Instrument Application
To minimize the instrument application so that you can use other programs on the Windows
interface, select Minimize from the File menu or right-click anywhere in the graticule and select
Minimize from the shortcut menu.
To restore the application, click the application name on the Windows task bar.
Shutting Down the Instrument
When you push the front-panel On/Standby switch, the instrument starts a shutdown process
(including a Windows shutdown) to preserve settings and then go into standby mode. Avoid
disconnecting the power cord to shut down the instrument.
Note
It may be necessary to hold the On/Standby switch for up to 20 seconds for the shutdown process
to initiate.
To completely remove power to the instrument, perform the shutdown process just described and
disconnect the power cord from the power source.
Adding Software Applications to the Instrument
Because the instrument is an open Windows platform, you can easily install and remove additional
software applications. Follow the instructions that came with your software and the basic
Windows instructions to install and remove your application.
Note
When adding software to the instrument, avoid making changes to system files. See Windows
Interface on page 39 for more information.
To Next Page
Loading...
Need help?
General
