To Next Page

To Previous Page

300

Select the color palette

Select the Display Setup control window Color tab.

14 Click a Color Palette button in the Fast/Acq WfmDB Palette. In

Fast Acquisitions mode, Temp and Spectral show more detail

than the other color palettes.

For a definition of each color palette, see page 145.

Time Stamping Frames

Use Time Stamps to display the absolute trigger time for a specific frame and the relative time

between triggers of two specified frames. To use FastFrame Time Stamps, do the following steps:

Prerequisites

FastFrame mode should be set up as described in the

previous example.

2 Turn on FastFrame

Turn readouts on or off

In the Time Stamps controls, click Readouts to toggle time

stamp readouts on or off: Readouts use the following format:

Sel Ch# F xxx DD MMM YYYY

HH:MM:SS.mmm µµµ nnn ppp

Ref Ch# F xxx DD MMM YYYY

HH:MM:SS.mmm µµµ nnn ppp

∆ DD MMM YYYY HH:MM:SS.mmm µµµ nnn

ppp

Where:

Sel and Ref Ch# F xxx are the selected or reference

frame number

DD MMM YYYY is the date (day, month, and year)

HH:MM:SS, is the clock time (hours, minutes, and

seconds)

mmm µµµ,nnn,ppp is a fraction of a second (to

picoseconds)

Select the reference frame

In the Time Stamps controls, click Source and select the

source of the reference frame.

5 In the Time Stamps controls, click Frame and use the

multipurpose knob or keypad to enter the number of the

reference frame. This value sets the starting frame when

measuring the relative time between two frames.

Tektronix TDS5000B Series Online Help

Other manuals for Tektronix TDS5000B Series