Various menu settings
3. Tap or to input the MAC address of the destination
PC/server you want to set. (Figure 3-97)
The input range is 00 to FF.
4. Input the values into all of the boxes with the same
operation as in steps 2 and 3. (Figure 3-98)
Figure 3-97
5. Tap [OK] to complete the setting. (Figure 3-99)
Proceed to “Setting the Communication Port”.
Figure 3-98
Figure 3-99
• If you do not tap [OK], the changes to the setting will not take effect.
Setting the Communication Port
1. Tap [Port] of [PC/Server]. (Figure 3-100)
The Port screen opens.
Figure 3-100
112
Note
To Next Page
Loading...
