Parts Description
Pressure Sensor Cable
(Catalogue number: XX
*
SPCBL021)
When measuring pressure, connect the pressure sensor which complies with the ANSI/AAMI BP22:1994 to the Controller. The
pressure sensors MP5100 (TW) and MP5200 (TW) made by Edwards Lifesciences Corporation are recommended for use.
Plug
Pressure sensor
connector
Cable
CDI Communication Cable
(Catalogue number: XX
*
SPCBL031)
When transmitting the flow information to the CDI System 500, connect the CDI System 500 to the Controller.
Hand Crank
(Catalogue number: XX
*
SP05)
When the centrifugal pump cannot be operated by the Controller, use the Hand Crank for manual operation.
For information on the usage method, refer to the instructions for use of the Hand Crank.
Fixed hook
Pole clamp
RPM display
Handle
Pump receptacle
Slide hook
Flexible shaft
Gear box
Crank
15
To Next Page
Loading...
