Toro Groundsmaster 360 - Crosstrax Traction Manifold Assembly

CrossTraxTractionManifoldAssembly
g036301
Figure133
1.Tractionmanifoldassembly6.90°hydraulictting11.Tinnermannut(2each)
2.O-ring7.Washer(4each)12.Bolt(2each)
3.45°hydraulictting(2each)8.Mount(2each)13.Flange-headscrew(2each)
4.O-ring9.Washer(2each)
5.Straighttting
10.Mountplate
RemovingtheCrossTraxTractionManifoldAssembly
1.Parkthemachineonalevelsurface,lowerthecuttingdeck,shutoffthe
engine,settheparkingbrake,andremovethekeyfromthekeyswitch.
CAUTION
Beforeopeningthehydraulicsystem,operateallthehydraulic
controlstoreleasesystempressureandavoidinjuryfromthe
pressurizedhydraulicuid;refertoReleasingPressurefromthe
HydraulicSystem(page4–5).
2.ReadtheGeneralPrecautionsforRemovingandInstallingtheHydraulic
SystemComponents(page4–68).
Groundsmaster360
Page4–129
HydraulicSystem:ServiceandRepairs
16225SLRevC