Toro Groundsmaster 360 Service Manual

OperatorAdvisoryScreen
g187150
Figure171
1.Faultindicator3.Advisorydescription
2.Advisoryqualier4.Advisorynumber/code
IftheT oroElectronicController(TEC)inputsarenotinthecorrectpositionto
allowcertainmachineoperations,oraremalfunctioning,thefaultindicatorwill
illuminateandanadvisoryscreenwillappearontheInfoCenterDisplay(Figure
171).Eachadvisoryscreenhas3elements:theadvisorynumber/code,advisory
description,andadvisoryqualier.
Anadvisoryqualierdenotesthecondition(s)thattriggeredtheadvisoryand
providesinstructiononeliminatingtheadvisory.Anoperatoradvisorymay
involveoneormoreadvisoryqualier.Typically,anadvisorycanbeeliminated
bychangingthepositionoftheoperatorcontrol(s)referencedbytheadvisory
qualier.Oncetherstqualierdisplayedissatised,anyadditionalqualiers
thatremaintobesatisedwillappearintheoperatoradvisoryscreenindividually.
Note:Ifamachinefaultoccursduringmachineoperation,theInfoCenterfault
indicatorwillblinktonotifytheoperator.Accessingthefaultlogisdescribedin
FaultsScreen(page5–17).
ElectricalSystem:InfoCenterDisplay
Page5–14
Groundsmaster360
16225SLRevC

Toro Groundsmaster 360 Specifications

General

Cutting Width	72 inches
Fuel Type	Diesel
Number of Blades	3
Transmission	Hydrostatic
Turning Radius	0 inches (0 cm) - Zero Turn
Drive System	4WD
Cutting Height	1.5 - 5 inches