Toro Groundsmaster 360 Service Manual

TestingtheTractionSystemOperation(continued)
wheelsraisedupoffthegroundandthemachinecorrectlysupportedwith
jackstands,haveanoperatorintheseatmovethetractioncontrolpedalto
thefullforwardspeed.Checktherotationalspeedofthe2rearwheels.The
wheelspeedofboththerearwheelsshouldbeapproximatelythesame.
2.Iftheoperationtestssuggestatractionsystemproblem,checkthefollowing
beforeyouperformthehydraulictests.
A.Checkthehydraulic-uidlevelinthehydraulictanktoensurethatthe
uidleveliscorrect.
B.Checkthebrakeadjustmenttoensurethatthebrakesarenotdragging.
C.Checkthatthe2transmissionbypassvalvesareseated.
D.Checkthatthetractionpedalisrotatingtheswashplatesofthe
transmissionpumpequally.
E.Checkforfreemovementofallthetractionlinkagecontrolcomponents.
Groundsmaster360
Page4–41
HydraulicSystem:TestingtheHydraulicSystem
16225SLRevC

Toro Groundsmaster 360 Specifications

General

Cutting Width	72 inches
Fuel Type	Diesel
Number of Blades	3
Transmission	Hydrostatic
Turning Radius	0 inches (0 cm) - Zero Turn
Drive System	4WD
Cutting Height	1.5 - 5 inches