Index
Strata DK40 I & M Manual Spring 1999
IN-v
wiring diagram (DKT), 4-2
PEKU, 1-3, 3-6
hardware options, 3-6
illustration, 3-8
installation, 3-7
programming, 3-7
wiring diagram (EKT), 4-5
wiring diagram (HDCB), 4-7
wiring diagram (HDSS), 4-6
PEMU
connectors, controls, indicators, 3-24
illustration, 3-24
installation procedures, 3-22
programming, 3-23
wiring diagram, 4-14, 4-15
PEPU, 1-3, 3-9
controls, indicators & connectors, 3-10
illustration, 3-10
installation procedure, 3-9
programming, 3-10
peripherals, 1-1, 1-5
PIOU/PIOUS, 3-11
hardware options
IMDU, 3-11
installation procedure, 3-12
multiple installation, 6-59
multiple PIOU/PIOUS installation, 6-59
peripherals, 1-5
PIOU controls, indicators, connectors, 3-
13
PIOU illustration, 3-14
PIOUS controls, indicators,
connectors, 3-15
PIOUS illustration, 3-14
programming, 3-13
power failure
options, 6-1
power failure terminal screws, 2-41
power supply
removal, 2-20
replacement, 2-21
wiring, 2-17
PSTU
controls, indicators, connectors, 3-26
cross connect record, 4-10
hardware option, 3-26
illustration, 3-27
installation procedure, 3-26
programming, 3-28
ring generator configuration, 3-26
wiring diagram, 4-9
R
R40S, 3-45
R48S, 1-4
illustration, 3-25
installation procedure, 3-25
RBSU, 3-56
RBSU/RBSS, 3-44
call monitor, 3-60
capacity and cabinet slot information, 3-
45
connecting to network side (TE-
mode), 3-58
connecting to station devices (NT-
mode), 3-58
EMC ferrite core requirement, 3-57
illustration, 3-48, 3-49
led indications, 3-53
LEDs & connectors, 3-55
modular jack pin configurations, 3-54
monitor jack, 3-55
option switches, jumpers, and
connectors, 3-50
overview, 3-44
passive bus configurations, 3-60
performance monitoring, 3-42
power failure terminal screws, 3-55
premise wiring guidelines, 3-55, 3-56
programming, 3-46
PS-1 backup power option, 3-45
R40S installation procedure, 3-51
To Next Page
Loading...
