3.22 Floppy Disk Drive Utilities 3 Tests and Diagnostics
TECRA 9100 Maintenance Manual (960-347) 3-49
4. DUMP program
(a) When DUMP is selected, the following message appears:
DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XX
Drive type select (1:FDD, 2:HDD) ?
(b) Select a format type number. If 2:HDD is selected, the display will go to step
(e).
Select drive number (1:A, 2:B) ?
(c) Select a drive number and the following message will be displayed.
Format type select (1:2DD, 2:2HD) ?
(d) Select a media type number and the following message will appear:
Insert source disk into drive A:
Press any key when ready.
(e) Insert a source disk and press any key and the following message will appear:
—— Max. address ——
[Track ] = XXXX
[Head]=XX
[Sector] = XX
Track number ??
(f) Set the track number you want to dump. The system will access the disk and
dump a list.
To Next Page
Loading...
