Toshiba TECRA 9100 Series - Page 160

3 Tests and Diagnostics 3.22 Floppy Disk Drive Utilities
3-50 TECRA 9100 Maintenance Manual (960-347)
5. HDD ID program
Selecting HDD ID displays the following HDD ID configuration:
[HDD ID Read (VX.XX)] [Drive #X]
ID code (h) = XXXX
No. of Cylinders = XXXX XXXX
Removable Cylinders = XXXX XXXX
No. of Heads = XXXX XXXX
Unformat Bytes/Track = XXXX XXXX
Unformat Bytes/Sector = XXXX XXXX
Sectors/Track = XXXX XXXX
Gap Length = XXXX XXXX
Sync. Bytes = XXXX XXXX
Reserved (h) = XXXX
Serial No. = YYY...
Controller Type (h) = XXXX
Sector Buffers = XXXX XXXX
ECC Bytes = XXXX XXXX
Firmware Rev. = YYYYYY..
Model No. = YYYY...
Reserved (h) = XXXX
Double Word Capability = XXXX XXXX
Press [Enter] key
Press Enter to return to the FDD UTILITIES MENU.