Configuration Guide     796
Configuring SNMP & RMON Appendix: Default Parameters
Parameter Default Setting
SNMP User
User Entry
No entries
User Name
None
User Type
Local User
Group Name
None
Security Model
v1
Security Level
noAuthNoPriv
Authentication 
Mode
MD5 (when Security Level is configured as AuthNoPriv 
or AuthPriv)
Authentication 
Password 
None
Privacy Mode
DES (when Security Level is configured as AuthPriv)
Privacy Password
None
Default settings of Notification are listed in the following table.
Table 7-5  Default Notification Settings
Parameter Default Setting
Notification Config
Notification Entry No entries
IP Mode  IPv4
IP Address None
UDP Port 162
User None
Security Model v1
Security Level noAuthNoPriv
Type Trap
Retry None in trap mode; 3 times in Inform mode.
Timeout None in trap mode; 100 seconds in Inform mode.
Trap Config
Enabled SNMP 
Traps
SNMP Authentication, Coldstart, Warmstart, Link 
Status