Configuring SNMP & RMON Appendix: Default Parameters
Configuration Guide
797
Default settings of RMON are listed in the following tables.
Table 7-6 Default Statistics Config Settings
Parameter Default Setting
Statistics Entry No entries
ID None
Port None
Owner None
IP Mode Valid
Table 7-7 Default Settings for History Entries
Parameter Default Setting
Port 1/0/1
Interval 1800 seconds
Max Buckets 50
Owner monitor
Status Disable
Table 7-8 Default Settings for Event Entries
Parameter Default Setting
User public
Description None
Type None
Owner monitor
Status Disable
Table 7-9 Default Settings for Alarm Entries
Parameter Default Setting
Variable RecBytes
Statistics 0, means no Statistics entries is selected.
Sample Type Absolute
Rising Threshold 100
Rising Event None
Falling Threshold 100
Falling Event None
Alarm Type All
To Next Page
Loading...
