TRUE SOLTEC CFM-BL10Pro - Page 7

CFM-BL10Pro General instruction manual
7 / 87
WARNING
(1)
Only use the adapter provided with your device. Otherwise, make sure
the power supply is within the range of this device before supplying
power.
(2)
Unplug the device from the AC socket immediately when there is unusual smell,
heating or smoke. Please contact your local dealership or contact us for
inspection.
(3)
Do not use CFM-BL10Pro in case there was a strong impact on it or it
was dropped. Please contact your local dealership or contact us for
inspection.
(4)
Do not attempt to repair, modify or disassemble the equipment. These procedures
should only be undertaken by True Soltec or other qualified service personnel.
(5)
Unplug the machine and other surrounding devices from AC outlet, before
installing or connecting it to other devices.
(6)
Do not let liquids or foreign objects (such as staple or clip) enter CFM-BL10Pro,
as it could result in short circuit. Should any liquids or foreign objects enter the
device, switch the power off immediately and contact your dealership or contact
us for inspection.
(7)
Avoid places where high moisture or humidity (such as bathroom) are present.
Do not touch or use the device with wet or damp hands when the power is on.
(8)
A lithium battery is built in this device for maintaining the operation of the electric
clock and the backup of various settings.
 Lithium battery properties:
Model : CR2032
Voltage : 3V
Electric Capacity ： 220mA
Lifespan : Approximate 5 years
 Do not dissemble, make pressure, heat the battery up or throw it into fire, as it
could cause battery rupture, ignition, or liquid leakage, which could result in
serious injuries.