USAGE AND STORAGE
CFM-BL10Pro is intended to be used under the following environmental conditions
to avoid damage to the product, and prevent it from malfunctions or deformation:
○ No exposure to direct sunlight. Operation temperature range: 10 ~ 40℃,
Humidity range: 20 ~ 85%
○ Do not place it near sources of heat or fire.
○ Do not place it near salt, oil, or corrosive gas.
○ Avoid places where power leakage, vibration, and static electricity are present.
○ Do not place it inside a car, trunk, or magnetic fields.
○ Do not place it on unstable surfaces.
POWER SUPPLY
○ Do not touch the device within 10 seconds after switching the power ON/OFF to
avoid electrical shock
○ Do not use the power supply that exceeds the rating. It may result in
malfunction.
○ In case the power supply has a lot of noise, use noise filter to reduce
the risks of malfunction.
To Next Page
Loading...
