EasyManua.ls Logo

turck BL20 Series - 8.4.2 Base modules

turck BL20 Series
537 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
121
2020/09
8.4.2 Base modules
Nominal current from module bus I
MB
35 mA
Power loss of the module, typical
< 1 W
Input voltage -10/0…+10 V
Maximum input voltage 35 V continuous
Input resistance (burden) 98,5 k
Cutoff frequency (-3 dB) 50 Hz
Basic error at 23 °C / 73.4 °F < 0,2 %
Repeatability 0,05 %
Temperature coefficient 150 ppm/°C from end value
Resolution of the A/D converter 16 bit
Measuring principle Delta Sigma
Measurement value representation 16 bit signed integer/12 bit full range,
left justified
Sensor supply 250 mA; bridged with L+ and L- from the power
supply; not short-circuit proof
Fig. 125: Base module BL20-S3T-SBB
Fig. 126: Base module BL20-S4T-SBBS
Technical data

Table of Contents

Related product manuals