turck BL20 Series - 10.1.7 Measurement value representation

269
2020/09
The default values are written in bold.
10.1.7 Measurement value representation
Parameters Value
Output range 0 = 0…20 mA
1 = 4…20 mA
Data format 0 = 15 bit + sign
1 = 12 bit (left-justified)
Substitute value Substitute value 0
1. The substitute value defined here will be sent in
consequence of certain events parameterized in the
gateway.
or
2. In case of a module bus error: The substitute value
defined here will be sent if the parameter ”Behavior
module bus error Ax” is set to ”output substitute
value”.
NOTE
A detailed description of the measurement value representation for the analog output
modules in 16 or 12 bit can be found in the Anhang, s. p. 16.